GM MDI failed to connect with wireless connection

What if GM MDI is unable to connect on Wireless interface?



· Check the wireless card is properly seated in the MDI.

· Confirm LEDs on the wireless card are lighted when the MDI is powered.

· Verify the MDI and PC are within range of the Access Point or Router.

· Verify that the PC is connected to the Access Point or Router.

· Verify signal strength of the wireless network from the PC.

· Check Firewall Settings on your PC

· USB connection takes precedence, unplug USB cable.

· Wired Ethernet connection takes precedence, unplug Ethernet cable.

· Connect to MDI using USB and run MDI Manager to verify the Wireless Settings are configured correctly. ( Refer to: How do I configure the Wireless interface?)

– Wireless interface is enabled.

-AP settings configured for proper security (authentication, encryption).

-Signal Quality (fair, good, excellent) indicates connected to AP.

-The MDI, PC and AP are on the same subnet o If using static IP, verify the IP Address and Subnet mask are correct (supplied by network administrator.

www.obdii365.com